Sunday, August 9, 2020

ITI DELHI Admissions Session 2020-21 | Dates, Fees, Notifications, Eligibility, Application and Counselling

 

ITI Delhi Admission Session 2020-21
ITI Delhi Admissions Session 2020-21

Delhi Government ITI Admission Session 2020-21: Department of Training & Technical Education, Govt. of NCT of Delhi had declared and released the schedule of admission for the session 2020-21. The aspirants seeking admission in various engineering and non-engineering certificate courses can check below for various requisite details like eligibility criteria, application form and admission process.

The authority will grant admission to the candidates based on merit only. The merit list will be available via online mode as per the given schedule. The shortlisted candidates will be eligible to participate in the counselling and seat allotment process. Read the article to know more about the Delhi ITI admission 2020.

Subscribe to ITI Delhi Informations

Get your newsletter from ITI Delhi about the latest updates and Details of Admission Process:

Enter your email address:

Delivered by FeedBurner


Overview

The candidates must enrol for the admission process to get training in various engineering and non-engineering courses. Check below the highlights of Delhi ITI 2020 admission-

Particulars Details 
Name of the Admission ProcessDelhi ITI Admission Session 2020-21
Conducting Body Department of Training & Technical Education [DTTE]
Admission Criteria Merit-Based 
Mode of Application Online 


ONLINE ADMISSION 2020 TENTATIVE SCHEDULE

(https://www.itidelhiadmissions.nic.in)


S. No

Activities

Date

Day

No. of Days

 

2

Date of Start of Online Candidate

Registration, Fee submission, Choice Filling & online verification of candidate documents at

http://www.itidelhiadmissions.nic.in

 

10-Aug-20

 

Mon

 

13 Days

3

Last Date of Online Candidate Registration & Fee

submission at http://www.itidelhiadmissions.nic.in

23-Aug-20

Sun

 

 

4

Last Date for Candidate online document Verification &

Choice Filling

 

24-Aug-20

 

Mon

 

5

Tentative Rank Display on http://www.itidelhiadmissions.nic.in

25-Aug-20

Tue

 

 

6

 

Online Submission of objections/correction by Candidates, against Tentative Rank

 

26-Aug -20, 27-

Aug-20

 

Wed, Thu

 

2 days

7

Final Rank Display at

http://www.itidelhiadmissions.nic.in

28-Aug-20

Fri

 

8

Publish of FIRST round Seat Allotment Result

2-Sep-20

Wed

 

9

First round Reporting as per allotted seats list

3-Sep-20, to 5- Sep-20

Thur, Fri, Sat

3 days

 

10

Display of vacant seat position after first round of seat allotment

 

6-Sep-20

 

Sun

 

 

11

 

Reshuffling of trades/ITI

6-Sep-20 to 7- Sep-20

 

Sun, Mon

 

2 days

 

12

 

Publish of SECOND round Seat Allotment Result

 

9-Sep-20

 

Wed

 

 

13

 

SECOND round Reporting as per allotted seats list

10-Sep-20 to 12-

Sep-20

THU,FRI, SAT

 

3 days

14

Display of vacant seat position after second round of seat allotment

13-Sep-20

Sun

 

 

15

 

Reshuffling of trades/ITI

13-Sep-20 to 14-

Sep-20

 

Sun, MON

 

2 days

16

Publish of THIRD round Seat Allotment Result

16-Sep-20

Wed

 

 

17

 

THIRD round Reporting as per allotted seats list

17-Sep-20 to 19-

Sep-20

THU,FRI, SAT

 

3 days

 

18

Display of vacant seat position after third round of seat allotment

 

20-Sep-20

 

Sun

 

19

Reshuffling of trades/ITI

20-Sep-20 to 21-

Oct-20

 

Sun, Mon

2 days

20

Publish of FOURTH round Seat Allotment Result

23-Sep-20

Wed

 

 

21

 

FOURTH round Reporting as per allotted seats list

24-Sep-20 to 26-

Sep-20

THU,FRI, SAT

 

3 days

Note:- Schedule is tentative. Moreover, there may be more rounds of counseling as per seat vacancy. There will be no OFF-Line round.

Saturday, February 8, 2020

Third Phase Schedule for uploading trainee data for session 2019

Third Phase Schedule for uploading trainee data for session 2019
Third Phase Schedule for uploading trainee data for session 2019

















By MSDE, DGT vide File no. DGT-MIS0ll/1/2018-O/o DIR (TC) on dated 16.01.2020.

Even after uploading of admitted trainee data in phase 1 & 2, still some more data is pending for uploading as well as error data needs to be corrected and uploaded again. It has been decided by competent authority to open the link for uploading of admitted trainee data in phase -3 as per the activity details below:

1. Freezing of Admitted Trainees data for the session 2019

Duration: 16.01.2020 to 18.01.2020

Concerned Stake Holder: All ITls have to send all the admitted trainee data for session 2019 by email to tcsection2019@gmall.com latest by 5.30 PM on 18.01.2020. ITls may please note that both successfully uploaded as well as pending for uploading entire data to be mailed to access the total number of with details of students admitted in the particular ITI. Only these students will be allowed to approve at the time of approval.

2. Third phase of uploading of admitted trainee data for the session 2019 by ITIs

Duration: 20.01.2020 to 31.01.2020

Concerned Stake Holder: ITls may upload only data pending for upload / error data after due corrections. While uploading ITls may please note that UID no. it's not mandatory, if mentioned it should be correct UID. In case of Mobile number, maximum 5 students can have same mobile number. In case if any students already admitted and uploaded left the ITI for any reason, ITI can remove such names by clicking on "discharge / delete" and upload the admitted trainee data against vacant seat. However, admissions beyond 21.10.2019 will not be allowed.

3. Third phase of uploading of admitted trainee data for the session 2019 by SPIUs

Duration: 03.02.2020 to 08.02.2020

Concerned Stake Holder: Where SPIUs are following online admission process, such SPIUs may directly upload the data. However, in case if already ITls uploaded the same data either in phase -1, 2 & 3 such data will not be uploaded to avoid duplicacy. In case if any students already admitted and uploaded left the ITI for any reason, ITI can remove such names by clicking on "discharge / delete" and upload the admitted trainee data against vacant seat. However, admissions beyond 21.10.2019 will not be allowed.

4. Photo uploading

Duration: 18.02.2020 to 29.02.2020

Concerned Stake Holder: By ITIs

5. Verification of Uploaded data

Duration: 02.03.2020 to 07.03.2020

Concerned Stake Holder: ITIs may take print out of uploaded data and check details. Only spelling mistakes in name, father name, mother name (Max. 3 letter in each category will be allowed).

6. Approval of uploaded trainee data

Duration: 09.03.2020 to 21.03.2020

Concerned Stake Holder: By SPIUs, no data correction will be allowed after 21.03.2020


In view of the above all the ITIs and SPIUs are advised to take necessary steps to upload the data, photo uploading, data verification & approving the uploaded data.

Please see original letter for more clarification uploaded on department's website.


Tuesday, February 4, 2020

MACHINIST

Two Years Engineering Trades - MACHINIST
Two years Engineering Trade - MACHINIST


Two Years Engineering Trades - MACHINIST


Machinists use machine tools, such as lathes, milling machines, and grinders, to produce precision metal parts. Although they may produce large quantities of one pat, precision machinists often produce small batches or one-of-a-kind items. They use their knowledge of the working properties of metals and their skill with machine tools to plan and carry out the operations needed to make machined products that meet precise specifications. The parts that machinists make range from bolts to Automobile pistons. Some machinists, often called production machinists, may produce large quantities of one part, especially parts requiring the use of complex operations and great precision. Many modern machine tools are computer numerically controlled (CNC). CNC machines, a computer program, control cutting tool speed, change dull tools and perform all necessray cuts to create a part.

PAINTER (GENERAL)

Two Years Engineering Trades - PAINTER (GENERAL)
Two Year Engineering Trade - PAINTER (General)

Two Years Engineering Trades - PAINTER (GENERAL)


This trade broadly covers oil painting using spray gun and brushes, stencilling, Painting of walls-Layout process, Pigment, Process of pretreatment of metal, surfaces, silk painting, Spray painting, colour codes and identification of pipe lines as per international and Indian standard, Airless electrostatic spraying. Rust-burg electrostatic, blade coater, Method and application processes of car body finishing various types of systems of spray painting and staving, methods of heat transfer time temperature relation in a staving oven. The trainees in Painter (General) may work as painter, Automobile, Railways, Aircraft's and Medium, Small industry or in government organizations.

Thursday, June 28, 2012

FITTER

Two year Engineering Trades - FITTER
Fitter is a person who uses machine tools to make or modify parts, primarily metal parts, and a process known as machining. This is accomplished by using machine tools to cut away excess material much as woodcarver cuts away excess wood to produce his work. The demand of fittings of various nature, Plumbing, Welding, Black Smithy, Knowledge on various lathes, drilling Machines, Sheet Metal Works etc. The fitter Workshops are equipped with modern and sophisticated Machineries, Equipment and Tools. The precision works are mainly handled by fitters in the Industries.